Bely 12V 150Ah RV Lithium Battery Li Ion Battery With Bluetooth &
Heating For solar power system / Street Light
Are you looking for the the best LiFePO4 battery?
Bely has you covered offering the latest in high performance lithium
batteries for your needs!
lithium battery up to 5x the lifespan of standard lead-acid
battery. This series is temperature resistant and lightweight, and offers a higher charge/discharge cycles, about 2,000 cycles at 80%
DOD (depth of discharge). LiFePO4 cathode is intrinsically safer
than the LiCo02 or the manganese cathode. Our wide variety of
standard and high performance batteries ensure we have what you
need, when you need it.
Bluetooth Function
LiFePO4 technology offers high-powered cell performance compatible
with lots of lithium-ion application to deliver more power and
extend long life. Also built with bluetooth function allow you to
read battery status freely anytime.
Self-heated Function
To relieve winter range anxiety in some freezing environment, the
BMS can bring with self heating function. Resistance heating
rapidly warms the inside of battery. Start heating
temperature:≤0°C. Stop heating temperature:≥10°C. Can improve
battery charge / discharge performance.
Specification of Lifepo4 Battery 12v 120AH
| Specification | Parameter | Remarks |
| Nominal | Voltage | 12.8V |
| Capacity | 150Ah/1920Wh |
| Physical | Dimension | 355mm x 175mm x 190mm |
| Weight | 17KGS |
| Electrical | Working Voltage Range | 10~14.6V |
| End of Charge Voltage | 14.4~14.6V |
| Recommended Charging Current | 80A |
| Max. Charging Current | 150A |
| Recommended Max Continuous Discharging Current | 120A |
| Max. Continuous Discharging Current | 150 A(Less than 25 mins) |
| Peak Discharging Current (≤20 sec.) | 200A |
| Others | Charging Temperature Range | 0~55℃ |
| Discharging Temperature Range | -20~60℃ |
| Storage Temperature Range | -20~60℃ |
| Cycle Life | ≥3000Cycles@90%DOD 25℃ |
| Internal Impedance | ≤20mΩ |
| Color | Black or customized |
| Battery Cells Type | Prismatic |
| Connector | Copper pillar |
| Charging mode | CCCV/IU |
| Life Time Designed@+25℃ | 10 Years |
| Protection Class | IP65 |
|
supplement | Long cycle life No memory effect High energy density Pollution-free High discharge rate Light weight High working voltage for single battery cells Capacity, resistance, Voltage, platform time consistency is good With short-circuit production function, safe and reliable Good consistency, low self discharge |
Battery Management System(BMS)
The battery management system (BMS) built into each battery ensures
that the battery switch off in the event of under voltage or
overload and automatically again turns on as soon as the problem is
resolved.
- Protection of the cell against under voltage by switching off the
load in good time.
- Protection of the cell against over voltage by reducing the
charging current or switching off the charging process.
- Shutting down the system in the event of excess temperature.
- Charging of the battery is stopped in case of under temperature.
Application of LiFePO4 Battery
Motohomes, caravans and RV
Photovoltaics, solar systems and renewable energies
High performance traction/storage battery
Fishing, electric boat motors and sonar
Mobile power supply, camping and leisure
Emergency power supply/UPS
Our Services & Strength
With reliable test equipments, batteries parameter and
specification can satisfy the customers' requirements and meet the
market standards well. Quality can be guaranteed and assured for
shipments.
Certificates approve qualified production and good quality products
Install the LiFePO4 battery
Lithium LiFePo4 batteries are heavy. Make sure it is adequate and
safe attach and always use the appropriate transport equipment.
In an accident unsecured, batteries could become a projectile!
Always take carefully with lithium batteries.
Make absolutely sure that the LiFePO4 battery is not connected with
reversed polarity.
Should the battery be connected incorrectly, the BMS electronics
will be irreparably damaged and must be replaced with a new BMS
board. This is not a warranty case.
Storage and transportation
The battery must be packed and protected well during transport.
The lithium battery must be transported according to the rules for
transport, these should always be followed (transportation code
UN3480/UN38.3).
Never lift the battery by the terminals, only by the handles.
The battery should be stored in temperatures from -10℃ to +30℃.
During transport, the battery should be about 50-60% charged.
The battery should be charged every three months to keep it active
so that it always works maximum.
FAQ:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. Do you have any MOQ limit?
A.Yes, we have MOQ for mass production, it depends on the different
part numbers. 1~10pcs sample order is available. Low MOQ, 1pc for
sample checking is available.
Q3. How to proceed with an order?
A. Firstly let us konw your requirements or application. Secondly,
we quote according to your requirements or our suggestions. Thirdly
customer confirms the samples and places a deposit for formal
order. Fourthly we arrange the production.
Q4. Is it OK print my logo on the product?
A. Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Q5. Which certificates do you have?
A. We have CE/FCC/ROHS/UN38.3/MSDS ... etc.
Q6. How about warranty?
A. 2 years warranty. Enable to prolong.
